| Peer-Reviewed

Review of Performance of Impedance Based and Travelling Wave Based Fault Location Algorithms in Double Circuit Transmission Lines

Received: 31 May 2015     Accepted: 10 June 2015     Published: 4 July 2015
Views:       Downloads:
Abstract

Parallel transmission lines or Double circuit transmission lines have been extensively utilized in modern power systems to enhance the reliability and security for transmission of electrical energy. This paper presents two fundamental algorithms: Impedance based, Travelling wave (TW) based algorithms for 100km, 400KV Double circuit transmission lines. MATLAB/ Simulink software was used to implement these algorithms. The accuracy of fault location on power transmission line are reviewed for these two methods by varying various parameters like fault type, fault location on a given power system model.

Published in Journal of Electrical and Electronic Engineering (Volume 3, Issue 4)
DOI 10.11648/j.jeee.20150304.11
Page(s) 65-69
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Fault Location, MATLAB, Impedance Based, Travelling Wave Based, Accuracy of Fault Location

References
[1] L. Eriksson, M. M. Saha, and G. D. Rockefeller, ``An accurate fault locator with compensation for apparent reactance in the fault resistance resulting from remote-end infeed,'' IEEE Trans. Power App. Syst., vol. PAS-104,no. 2, pp. 423_436, Feb. 1985.
[2] Izykowski J, Rosolowski E, Saha MM (2004) “Locating faults in parallel transmission lines under availability of complete measurements at one end”. IEE Proc – Gener Transm Distrib 151(2):268–273.
[3] M. S. Sachdev and R. Agarwal, “A technique for estimating transmission line fault locations from digital impedance relay measurements,” IEEE Trans. Power Del., vol. 3, no. 1, pp. 121–129, Jan. 1988.
[4] Saha MM, Wikstrom K, Izykowski J, Rosolowski E (2001) “New fault location algorithm for parallel lines”. In: Proc of 7th Int Conf on Developments in Power System Protection – DPSP, IEE CP476 pp 407–410.
[5] Wiszniewski A. “Accurate fault impedance locating algorithm”. IEE Proc C1983:130(6):311-5.
[6] Izykowski J, Kawecki R, Rosolowski E (2002) “Accurate location of faults in parallel transmission lines under availability of measurements from one circuit only”.In: Proc of Power Systems Computation Conference –PSCC’02 (CD ROM), Sevilla,paper 6.
[7] Magnago FH, Abur A (1998) “Fault location using wavelets”. IEEE Trans on Power Deliv 13(4):1475–1480.
[8] Abur A, Magnago FH (2000) Use of time delays between modal components in wavelet based fault location. Int J Electr Power and Energy Syst 22(6):397–403.
[9] V.S.Kale, S.R.Bhide, P.P.Bedekar, Faulted Phase Selection Based on Wavelet Analysis of Traveling Waves”, International Journal of Computer and Electrical Engineering, Vol. 3, No. 3, June 2011.
[10] AnkammaRao J, BizuayehuBogale .“Double Circuit Transmission Line Fault Distance Location using Wavelet Transform and WMM Technique ",International Journal of Science and Research (IJSR), Vol.4, Issue.1,January-2015.
[11] Anamika Jain, Kale VS, Thoke AS. Application of artificial neural networks to transmission line faulty phase selection and fault distance location. In: IASTED, Chiang Mai, Thailand; 29–31 March 2006. p. 262–7.
[12] MATLAB user’s guide, The Math Works Inc., Natick, MA.
Cite This Article
  • APA Style

    Ankamma Rao Jonnalagadda, Gebreegziabher Hagos. (2015). Review of Performance of Impedance Based and Travelling Wave Based Fault Location Algorithms in Double Circuit Transmission Lines. Journal of Electrical and Electronic Engineering, 3(4), 65-69. https://doi.org/10.11648/j.jeee.20150304.11

    Copy | Download

    ACS Style

    Ankamma Rao Jonnalagadda; Gebreegziabher Hagos. Review of Performance of Impedance Based and Travelling Wave Based Fault Location Algorithms in Double Circuit Transmission Lines. J. Electr. Electron. Eng. 2015, 3(4), 65-69. doi: 10.11648/j.jeee.20150304.11

    Copy | Download

    AMA Style

    Ankamma Rao Jonnalagadda, Gebreegziabher Hagos. Review of Performance of Impedance Based and Travelling Wave Based Fault Location Algorithms in Double Circuit Transmission Lines. J Electr Electron Eng. 2015;3(4):65-69. doi: 10.11648/j.jeee.20150304.11

    Copy | Download

  • @article{10.11648/j.jeee.20150304.11,
      author = {Ankamma Rao Jonnalagadda and Gebreegziabher Hagos},
      title = {Review of Performance of Impedance Based and Travelling Wave Based Fault Location Algorithms in Double Circuit Transmission Lines},
      journal = {Journal of Electrical and Electronic Engineering},
      volume = {3},
      number = {4},
      pages = {65-69},
      doi = {10.11648/j.jeee.20150304.11},
      url = {https://doi.org/10.11648/j.jeee.20150304.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20150304.11},
      abstract = {Parallel transmission lines or Double circuit transmission lines have been extensively utilized in modern power systems to enhance the reliability and security for transmission of electrical energy. This paper presents two fundamental algorithms: Impedance based, Travelling wave (TW) based algorithms for 100km, 400KV Double circuit transmission lines. MATLAB/ Simulink software was used to implement these algorithms. The accuracy of fault location on power transmission line are reviewed for these two methods by varying various parameters like fault type, fault location on a given power system model.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Review of Performance of Impedance Based and Travelling Wave Based Fault Location Algorithms in Double Circuit Transmission Lines
    AU  - Ankamma Rao Jonnalagadda
    AU  - Gebreegziabher Hagos
    Y1  - 2015/07/04
    PY  - 2015
    N1  - https://doi.org/10.11648/j.jeee.20150304.11
    DO  - 10.11648/j.jeee.20150304.11
    T2  - Journal of Electrical and Electronic Engineering
    JF  - Journal of Electrical and Electronic Engineering
    JO  - Journal of Electrical and Electronic Engineering
    SP  - 65
    EP  - 69
    PB  - Science Publishing Group
    SN  - 2329-1605
    UR  - https://doi.org/10.11648/j.jeee.20150304.11
    AB  - Parallel transmission lines or Double circuit transmission lines have been extensively utilized in modern power systems to enhance the reliability and security for transmission of electrical energy. This paper presents two fundamental algorithms: Impedance based, Travelling wave (TW) based algorithms for 100km, 400KV Double circuit transmission lines. MATLAB/ Simulink software was used to implement these algorithms. The accuracy of fault location on power transmission line are reviewed for these two methods by varying various parameters like fault type, fault location on a given power system model.
    VL  - 3
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Department of Electrical & Computer Engineering, School of Engineering & Technology, Samara University, Semera, Afar Region, Ethiopia

  • Department of Electrical & Computer Engineering, School of Engineering & Technology, Samara University, Semera, Afar Region, Ethiopia

  • Sections